Sealife Sea Dragon flash Instruction Manual page 10

Connecting Flash Link optical cable to NON-Sealife cameras
The universal cable adapter included with the flash allows you to
attach the optical cable to any underwater camera housing.
10
Step 1: Cut two small strips of adhesive
backed hook-and-loop fastener
Step 2: Remove adhesive backing strips
and firmly attach above and below the
flash window of the underwater housing.
Make sure housing surface is clean and
dry.
Step 3: Unscrew cable adapter assembly
and insert the larger half through the hole
of the hook-n-loop fastener as shown.
Make sure the "hook" side of the fastener
is facing towards the wide end of the
adapter (towards the camera).