Sealife Sea Dragon flash Instruction Manual page 8

Connecting Flash Link optical cable to the external flash
The Flash includes the Flash Link optical cable (item
#SL96208). The optical cable is used to transmit light from the
camera to the light sensor under the flash head. The external
flash will fire when the light sensor detects light coming from
the end of the cable.
The external flash should come with the optical cable already
attached to the flash head, but it is good to know how the cable
can be removed and re-attached.
1.
1. Turn the cable locking screw counter-clockwise by about 2
rotations to loosen the clamping effect of the lock. Do not
remove the locking screws.
2. Insert the optical cable into the hole of the cable lock until the
cable stops [make sure cable is pushed up all the way].
3. Turn the cable locking screw clockwise to lock the cable into
place [finger tight only – Do not over tighten].
8
2. 3.