Sealife Sea Dragon flash Instruction Manual page 11

Connecting Flash Link optical cable to NON-SeaLife cameras
(continued)
Step 4: Loosely screw on the smaller half
of the adapter.
Step 5: Insert the cable(s) so about 1mm
sticks out of the other end and tighten the
cable adapter assembly. Hand tighten –
do not use tools. .
Step 6: Attach fastener with cable to
underwater housing so the cable is
centered over the flash window.
Step 7: User scissor to cut away excess
fastener material. Important: Leave
enough fastener material so it completely
covers the flash window or else the stray
light escaping from the flash window
may cause backscatter.
11