Table of Contents
Advertisement
21
5.19 Program Playback
It allows you to enter the order in which you want some chapters/tracks in
DVD/VCD/MP3/WMA/CD to play.
1 During playback, press the PROG button to enter a program interface as
follows:
2 Use the direction buttons to move cursor onto the desired place for inputting
the sequence number.
3 Use the number button to input desired sequence number of title/chapter/
track with desired sequence.
4 Use the direction button to move cursor onto Play item, then press the OK
button to play the programmed titles/chapters/tracks in programmed order;
only pressing the PLAY button also can play the programmed titles/chapters
/tracks in programmed order.
*
To exit program playback, firstly press the STOP button, then press the PLAY
button to enter sequence playback; or press the PROG button twice again.
*
To remove the all programmed sequence numbers, move the cursor onto
Clear item, then press the OK button.
*
To change the programmed sequence, move the cursor onto the item you
want to change, input the desired sequence number.
*
During VCD playback, if it is in PBC ON mode, at the same time of entering
the state of program playback, it turns off PBC mode.
5.20 Playback IMAGE files
1. The root menu is displayed on the monitor when beginning to switch on IMAGE
mode. .
In the root menu, the left file sort icon is for MP3/WMA file; the middle file sort
icon is for IMAGE file; the right file sort icon is for VIDEO file. If one of these 3
file sort does not exist, you can not move cursor onto the file sort icon.
2. When displaying the root menu, press the direction buttons to select your
desired FOLDER, file or file sort icon, then press the OK or PLAY button to
open the FOLDER, or play the selected file, or play only this sort of file.
When displaying the root menu, you can also use the number buttons to
select the serial number of the file and play the file.
3. Display control icons
When displaying playback, tap
to control icons as right.
Tapping the direction icon to select the play
function such as : PLAYLISTS, ARTISTS,
ALBUMS, GENRES, SONGS,
COMPOSERS, REPEAT and so on.
4. Play video files
During audio playback, tap this
video playback.
: Tap one of them to select the track or
chapter in your library, after that, tap the
OK to confirm and play your selection.
: After selecting, tap it to play your selection.
Note:This device only supports video files from certain devices due to the
software limitation on your device.
5. Disc, USB and CARD Operation
5.1 Load/unload disc, USB or CARD
To play files in a disc or card, press the EJECT button to slide down the monitor .
Then insert the disc or card into the disc slot or SD/MMC Card slot.
To unload the disc or card, press the STOP button twice to stop playback, then
press the EJECT button to slide down the monitor and eject disc in the disc slot
and then remove the disc; or push the card firstly and pull it out of the card slot.
To play files in an USB, insert the USB into the USB jack connecting to the Rear
cabinet.
To unload the USB, press the STOP button twice and then remove the USB .
In USB or CARD mode, select your desired as right.
Remark: the
icon is for audio files; the
for video files; the
icon is for image files.
Tap the
icon to turn to main menu, tap the
to turn to previous setting.
icon to turn
Control icons
icon to turn to
VIDEO mode
icon is
icon
USB/CARD INTERFACE
14
Advertisement
Table of Contents
