HP EliteBook 8440p Specification page 39

QuickSpecs
Technical Specifications
information
Material Usage
DA - 13520 Canada — Version 17 — September 29, 2011
(RoHS) directive - 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and Electronic
Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Gold
level, see: www.epeat.net
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 90% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
Paper 97 g
Internal:
Polyethylene low density solid 13 g
Molded Pulp 100 g
Polyethylene low density 4 g
The paper material is made from 80% recycled content.
The Polyethylene low density solid is made from 100% recycled
content.
The Molded Pulp is made from 80% recycled content.
The Polyethylene low density material is made from 4% recycled
content.
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
This product does not contain any of the following substances in excess of
HP EliteBook 8440p Notebook PC
Page 39