Memory - HP EliteBook 8440p Specification

QuickSpecs

Memory

DDR3 PC3-10600 SDRAM (1333
Two SODIMM slots supporting dual-channel memory
SODIMM sizes supported: 1024 MB, 2048 MB, and 4096 MB
Standard Memory
Optional Memory Upgrades
Up to
1024 MB
2048 MB
2048 MB
3072 MB
4096 MB
4096 MB
8192 MB
Memory Upgrades
MHz)*
1024 MB (1024 MB x 1)
2048 MB (2048 MB x 1 or 1024 MB x 2)
3072 MB (2048 MB + 1024 MB)
4096 MB (4096 MB x 1 or 2048 MB x 2)
Support for up to 8192 MB of memory with the installation of optional DDR3 SDRAM memory kits.
Both memory slots are user-accessible. Please refer to the Hardware and Software Guide for
installation procedures. Maximized dual-channel performance requires SODIMMs of the same size and
speed in both memory slots.
* With some processors, memory bus runs at a maximum of 1066 MHz.
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry
standard nature of some third-party memory modules, we strongly recommend using only HP-
branded memory modules to ensure compatibility. If you mix memory speeds, the system will
perform at the lower memory speed. Full availability of 4 GB or more of memory requires a Windows
64-bit operating system or Linux. With Windows 32-bit operating systems, the amount of usable
memory is dependent upon your configuration, so that above 3 GB all memory may not be available
due to system resource requirements.
HP 1 GB (DDR3 1333 MHz) SODIMM
HP 2 GB (DDR3 1333 MHz) SODIMM
HP 4 GB (DDR3 1333 MHz) SODIMM
DA - 13520 Canada — Version 17 — September 29, 2011
HP EliteBook 8440p Notebook PC
Slot 1
1024 MB
2048 MB
1024 MB
2048 MB
4096 MB
2048 MB
4096 MB
Slot 2
Empty
Empty
1024 MB
1024 MB
Empty
2048 MB
4096 MB
AT911AA
AT912AA
AT913AA
Page 16