Nic Indicators; Rails And Cable Management; Readyrails Sliding Rails; Readyrails Static Rails - Dell PowerEdge R410 Technical Manual

Dell
Figure 6.

4.5 NIC Indicators

See the NIC Indicator Codes section in the About Your System chapter of the PowerEdge R410
Hardware Owner's Manual on

4.6 Rails and Cable Management

4.6.1

ReadyRails Sliding Rails

TM
ReadyRails Sliding Rails for 4-post racks support includes:
•
Tool-less installation in 19" EIA-310-E compliant square or unthreaded round hole 4-post racks
including all generations of Dell racks
•
Tooled installation in 19" EIA-310-E compliant threaded hole 4-post racks (requires the 1U
Threaded Rack Adapter Brackets Kit)
•
Full extension of the system out of the rack to allow serviceability of key internal components
•
Optional cable management arm (CMA)
Rail depth and adjustment ranges are as follows:
•
Rail depth without the CMA: 714 mm
•
Rail depth with the CMA: 835 mm
•
Square-hole rack adjustment range: 686-883 mm
•
Round-hole rack adjustment range: 672-876 mm
•
Threaded-hole rack adjustment range: 651-897 mm
4.6.2

ReadyRails Static Rails

TM
ReadyRails Static Rails for 4-post and 2-post racks support:
•
Tool-less installation in 19" EIA-310-E compliant square or unthreaded round hole 4-post racks
including all generations of Dell racks
•
Tooled installation in 19" EIA-310-E compliant threaded hole 4-post and 2-post racks
Rail depth and adjustment ranges are as follows:
•
Rail depth: 622 mm
•
Square-hole rack adjustment range: 608-879 mm
•
Round-hole rack adjustment range: 594-872 mm
•
Threaded-hole rack adjustment range: 604-890 mm
See Section 14, Rack Information, for more information.
PowerEdge R410 Technical Guide
Back View With Non-redundant Power Supply
Support.Dell.com/Manuals for more information.
16