Environmental Specifications; Table 7. Environmental Specifications - Dell PowerEdge T710 Technical Manual

Dell

5.6 Environmental Specifications

Temperature
Operating
Storage
Relative Humidity
Operating
Storage
Maximum Vibration
Operating
Storage
Maximum Shock
Operating
Storage
Altitude
Operating
Storage
Airborne contaminant level
Class G1 or lower as defined by ISA-S71.04-1985 (G1 maximum corrosive contaminant levels
measured at ≤ 50% relative humidity)
1
Use the formulas in Table 8 to calculate the maximum operating temperature, T (°C or °F), for the
given altitude (in meters or feet).
PowerEdge T710 Technical Guide
Table 7. Environmental Specifications
10°C to 35°C (50°F to 95°F) with a maximum temperature
gradation of 10°C per hour
1
10°C to T °C (50°F to T
-40°C to 65°C (-40°F to 149°F) with a maximum temperature
gradation of 20°C per hour
20% to 80% (non-condensing) with a maximum humidity gradation
of 10% per hour
5% to 95% (non-condensing) with a maximum humidity gradation
of 10% per hour
0.26Grms at 5Hz–350Hz in operational orientations
1.54Grms at 10Hz–250Hz in all orientations
Half sine shock in all operational orientations of 31G  5% with a
pulse duration of 2.6ms  10%
Half sine shock on all six sides of 71G  5% with a pulse duration
of 2ms  10%
Square wave shock on all six sides of 27G with velocity change @
235 in/sec or greater
-16m to 3048m (-50 to 10,000ft)
Note: For altitudes above 2950 feet, the maximum operating
temperature is de-rated 1°F/550ft.
-16m to 10,600m (-50ft to 35,000ft)
1
°F) for altitudes above 900m (2950ft)
22