Dell
See the Back-Panel Features and Indicators section in the About Your System chapter of the
PowerEdge T710 Hardware Owner's Manual on
4.6 Power Supply Indicators
The PowerEdge T710 redundant power supplies have one status bi-color LED: green for AC power
present and amber for a fault as detailed in Table 3.
See the Power Indicator Codes section in the About Your System chapter of the PowerEdge T710
Hardware Owner's Manual on
PowerEdge T710 Technical Guide
Figure 4.
Table 3.
LED
Power Supply Status
AC Power is not present
AC Power is present
Fault of any kind is detected
DC Power is applied to the system
Redundant power supply mismatch
↔
(when hot-plugged/swapped)
Support.Dell.com
Back View
Support.Dell.com
for more information.
Power Supply Status
for more information.
16