Anti-Theft Alarm System; (Dwa); Anti-Theft Alarm System (Dwa) - BMW R 1200GS Rider's Manual

and have the passenger dis-
mount if necessary.
The ESA display disappears
once the adjustment procedure
has been completed.

Anti-theft alarm system

(DWA)

OE
with anti-theft alarm
Activation
Switch on ignition.
Customize anti-theft alarm sys-
tem settings ( 68).
Switch off ignition.
If DWA is activated, DWA is
automatically activated after the
ignition is switched off.
Activation takes approximately
30 seconds to complete.
Turn indicators are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm system is acti-
vated.
Alarm
The alarm can be triggered by
the motion sensor
an attempt to use an unau-
thorized key to switch on the
ignition
disconnecting the alarm system
from the motorcycle battery
(alarm system battery takes
over the power supply - alarm
sound only, no illumination of
the turn signals)
All functions are sustained even if
the internal battery of the anti-
theft alarm system is flat; the
only difference is that an alarm
cannot be triggered if the system
is disconnected from the motor-
cycle's battery.
An alarm lasts for approximately
26 seconds. During the alarm,
an alarm tone sounds and the
turn signals flash. The alarm tone
type can be adjusted by an au-
thorized BMW Motorrad retailer.
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched on.
The anti-theft alarm system indi-
cator lamp then signals the rea-
son for the alarm for one minute.
The meanings of the flash codes
are as follows:
Flashes 1x: Motion sensor 1
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorized key
Flashes 4x: Alarm system is
disconnected from the motor-
cycle battery
Flashes 5x: Motion sensor 3
4
67
z