Set Sleep Timer; Play Audio From An External Device; Adjust Display Brightness - Philips AJ6000/12 User Manual

Set sleep timer

Note
•
Make sure that the Third Knob switched to CLOCK
before setting.
This clock radio can switch to standby mode
automatically after a preset period.
• Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
To deactivate the sleep timer:
Press SLEEP repeatedly until [OFF] (off)
•
appears.
15 30 60
OFF
Play audio from an external
device
Note
•
Make sure that the Third Knob switched to CLOCK
before setting.
You can listen to audio from an external device
through this clock radio.
1
Connect an audio cable to:
• the AUDIO IN socket on the clock
radio.
• the headphone socket on an external
device.
2
Press SOURCE repeatedly to select the
Audio-in source.
» The on the display panel lights up.
3
Play the external device (refer to its user
manual).
EN
9
90 120

Adjust display brightness

SNOOZE
BRIGHTNESS