Set Time; Turn On - Philips AJ6000/12 User Manual

Option 2: Battery power
Caution
•
Batteries contain chemical substances, so they should
be disposed of properly.
Note
•
Batteries are not supplied with the accessories.
•
bAt shows on the display when the battery level is low.
1
Open the battery compartment.
2
Insert 2 batteries (type: 1.5V LR6/AA) with
correct polarity (+/-) as indicated.
3
Close the battery compartment.

Set time

1
Rotate the Third Knob to "SET TIME" to
activate clock setting mode.
» Hour and minute digits blinks.
2
Rotate the First Knob to adjust the hour.
3
Rotate the Second Knob to adjust the
minute.
4
Press OK on the First Knob to confirm.
» The setting time is displayed.
5
Rotate the Third Knob to CLOCK after
setting.
» The hour and minute digits stops
blinking.

Turn on

The clock radio turns on automatically once
your plugged in.
Switch to standby mode
Press SOURCE for 3 seconds to switch to
standby mode.
» The source indicator on the display
panel turns off.
EN
6