Other Features; Set Alarm Time; Set Sleep Timer - Philips R3205 User Manual

5 Other features

Set alarm time

Set alarm
Note
•
You can only set the alarm in standby mode.
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold AL1 or
AL2 for 2 seconds to set alarm time.
2
Press HR to set hour and MIN to set
minute, then press AL1 or AL2 to confirm.
Tip
•
The unit exits alarm setting mode when being idle for 10
seconds.
Select alarm source
You can select FM radio or buzzer as the alarm
source by pressing AL1 or AL2 in standby
mode.
» The corresponding alarm icon lights up.
Note
•
The gentle wake-up function is designed for FM radio
source only.
Activate/deactivate alarm timer
Press AL1 or AL2 repeatedly to activate or
deactivate the alarm timer.
» If the alarm timer is activated, the alarm
indicator turns on.
» If the alarm timer is deactivated, the alarm
indicator turns off.
EN
6
» The alarm repeats ringing for the next day.
» To stop the alarm, press the coresponding
AL1 or AL2.
Snooze the alarm
When the alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing 9
minutes later.

Set sleep timer

This clock radio can switch to standby mode
automatically after a preset period.
• Press SLEEP repeatedly to select a period
(in minutes).
» The clock radio switches to standby mode
automatically after the preset period.
To deactivate the sleep timer:
• Press SLEEP repeatedly until [OFF] (off)
appears.