Other Features; Set Alarm Time; Set Sleep Timer; Adjust Volume - Philips R3505 User Manual

6 Other features

Set alarm time

Set alarm
Note
•
You can only set the alarm in standby mode.
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold AL1 or AL2
for more than 2 seconds to set alarm time.
2
Press HR to set hour and MIN to set minute,
then press AL1 or AL2
3
TUN
Press to set alarm type (daily, once,
AL2
4
TUN
Press to set an alarm source (FM,
5
TUN
Press to set the volume level, then
press AL1 or AL2
Tip
•
The unit exits alarm setting mode when being idle for 15
seconds.
Activate/deactivate alarm timer
Press AL1 or AL2 repeatedly to activate or
deactivate the alarm timer.
If the alarm timer is activated, the alarm
indicator turns on.
If the alarm timer is deactivated, the alarm
indicator turns off.
The alarm repeats ringing for the next day.
To stop the alarm, press the coresponding
AL1 or AL2.
EN
8
AL1 or
AL1 or AL2 to
Snooze the alarm
When the alarm sounds, press SNOOZE.
The alarm snoozes and repeats ringing 9
minutes later.

Set sleep timer

This clock radio can switch to standby mode
automatically after a preset period.
• Press SLEEP repeatedly to select a period
The clock radio switches to standby mode
automatically after the preset period.
To deactivate the sleep timer:
• Press SLEEP repeatedly until [OFF
appears.

Adjust volume

While listening, press

Adjust display brightness

Press BRIGHTNESS repeatedly to adjust the
display brightness.
• HIGH
• MED
• LOW
VOL to adjust volume.