Contents 1 Important 2 Your clock radio What's in the box Overview of the main unit 3 Get started Connect power Set time Turn on 4 Listen to FM radio Tune to FM radio stations Store FM radio stations manually Store FM radio stations automatically Select a preset radio station 5 Other features...
1 Important 2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the Warning support that Philips offers, register your product • Never remove the casing of this clock radio. at www.philips.com/welcome. • Never lubricate any part of this clock radio.
Overview of the main unit a SOURCE f VOLUME +/- • Select a source.(FM/AUDIO IN) • Adjust volume. • Press and hold for 3 seconds to switch to standby mode. g First Knob (HOUR/PRESET) • Adjust hour. b SLEEP • Select a preset radio station. • Set sleep timer.
3 Get started j BUZZ/FM/SOUND 1/SOUND 2 • Select an alarm source for Alarm 1 and Alarm 2. (5.0 V 1 A) Always follow the instructions in this chapter in • Charge your iPod/iPhone through USB sequence. cable (not included). l AUDIO IN Connect power • Connect an external audio device.
Option 2: Battery power Set time Caution Rotate the Third Knob to "SET TIME" to • Batteries contain chemical substances, so they should activate clock setting mode. be disposed of properly. » Hour and minute digits blinks. Rotate the First Knob to adjust the hour. Note Rotate the Second Knob to adjust the minute.
4 Listen to FM Rotate the First Knob again to select the target preset position. radio Press OK on the First Knob to confirm. Repeat steps 2-4 to store other stations. Note • To remove a pre-stored station, store another station Tune to FM radio stations in its place.
5 Other features Set alarm timer ALARM In standby mode, you can set two alarms to ring BUZZ at different time. Note Activate/deactivate alarm timer • Make sure that you have set the clock correctly. Note Rotate the Third Knob to SET AL1 or SET •...
Set sleep timer Note • Make sure that the Third Knob switched to CLOCK before setting. This clock radio can switch to standby mode automatically after a preset period. • Press SLEEP repeatedly to select the sleep timer period (in minutes). »...
If you encounter problems when using this device, check the following points before Specifications requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the Amplifier model number and serial number are available.
8 Notice rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), This product complies with the radio polystyrene foam (buffer) and polyethylene interference requirements of the European...