Base Enclosure - HP ENVY 17 Maintenance And Service Manual

Base enclosure

Description
For use only on HP ENVY TouchSmart m7 Notebook PC computer models
Base enclosure for use only on HP ENVY TouchSmart 17 Notebook PC computer models with Leap
Motion capability
Base enclosure for use only on HP ENVY TouchSmart 17 Notebook PC computer models without
Leap Motion capability
Base enclosure for use only on computer models equipped with a non-TouchScreen display
assembly
Rubber Feet Kit:
For use on HP ENVY TouchSmart m7 Notebook PC computer models
For use on HP ENVY TouchSmart 17 Notebook PC computer models and computer models
equipped with a non-TouchScreen display assembly
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service cover (see
6.
Remove the hard drive (see
7.
Remove the memory modules (see
8.
Remove the WLAN module (see
9.
Remove the optical drive (see
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 46).
Service cover on page
Hard drive on page
Memory modules on page
WLAN module on page
Optical drive on page
47).
48).
51).
52).
55).
Spare part number
720226-001
736476-001
736475-001
720225-001
720259-001
720258-001