Usb Board - HP ENVY 17 Maintenance And Service Manual

USB board

Description
For use only on computer models equipped with a graphics subsystem with discrete memory
For use only on computer models with Leap Motion capability
For use only on computer models equipped with a graphics subsystem with UMA memory
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the display panel (see
6.
Remove the service cover (see
7. Remove the hard drive (see
8. Remove the memory modules (see
9. Remove the WLAN module (see
10. Remove the optical drive (see
11. Remove the base enclosure (see
12.
Remove the front speakers (see
13.
Remove the subwoofer (see ).
Battery on page 46).
Display panel on page
Service cover on page
Hard drive on page
Memory modules on page
WLAN module on page
Optical drive on page
Base enclosure on page
Front speakers on page
59).
47).
48).
51).
52).
55).
64).
68).
Component replacement procedures
Spare part number
724142-001
741074-001
720251-001
79