Fan - HP ENVY 17 Maintenance And Service Manual

3. Release the clips (3), and then remove the power connector cable (4).
Reverse this procedure to install the power connector cable and bracket.

Fan

Description
Fan (with foil)
Before removing the fan:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the display panel (see
6.
Remove the service cover (see
7.
Remove the hard drive (see
8.
Remove the memory modules (see
9.
Remove the WLAN module (see
Battery on page 46).
Display panel on page
Service cover on page
Hard drive on page
Memory modules on page
WLAN module on page
59).
47).
48).
51).
52).
Component replacement procedures
Spare part number
720235-001
85