Installing A Module; Installing Modules - Cisco Aironet 3600 Series Getting Started Manual

10

Installing Modules

Modules are devices that are purchased as seperate items. When they are installed in the
Cisco Aironet 3600 series access point, they give the access point additional capabilities.
Modules connect to the access point's module port. No special tools are required to install a module.

Installing a Module

Follow these steps to install a module:
Remove the module from the packaging.
Step 1
Power down the access point.
Step 2
Peel off the label from the back of the 3600 series access point to reveal the module port
Step 3
connector.
1
1 Openings for module's antennas.
16
2 1
2 Label covering port connector.