Selfview And Camera Control - Cisco Profile Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents Getting started Getting started

Selfview and camera control

You may want to check how
you appear on the screen. To
do this, tap Selfview ...
Entering Camera Control will
also cause the system to show
selfview, so if you know that camera
adjustments are needed, you do not
have to activate selfview first.
D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls Using directories
Use + and – to adjust the zoom and the arrow
keys to adjust the camera's angle. You may also
define or edit camera presets in this menu, see
"Adding a near end camera preset" on page
6 for details.
5
In-call features
... then tap More.
User guide
Settings Contact us
Tap Camera control to gain
access to the Camera control
menu.
Tap Back to go one level back, or tap
anywhere outside to exit the menu.
www.cisco.com