Sound Matters; Receiving Calls; Ring Tones And Sounds; Do Not Disturb - Cisco Profile Series User Manual
Telepresence conference system
Hide thumbs
Also See for Profile Series:
- Installation manual (44 pages) ,
- Getting started manual (32 pages) ,
- Manual (16 pages)
Table of Contents
Advertisement
Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents
Getting started
Getting started
Sound matters
You may deactivate the microphone for privacy
reasons, if needed (
).
Tap as outlined (
) to adjust the sound volume.
Receiving calls
When someone calls you, the below display will
appear. Tap ACCEPT to take the call or DECLINE to
reject it.
D14582.07
User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls
Ring tones and sounds
To set ringtones and sound, tap More (
Settings (
Set Keytones to On or Off, the Ringtone volume and
select the ringtone of your choice. Tap Exit to go back.
Using directories
In-call features
) followed by
). Then tap Ringtone & Sound Settings (
10
Settings
Do not disturb
When set to Do Not Disturb, ringtones are muted and
call attempts made by others to reach you will appear
).
as missed calls.
You may, however, place calls as much as you like. To
activate Do Not Disturb, press the Available icon as
outlined. Press again to deactivate.
You may also hide the Do Not Disturb poster by tapping
Hide. This will not deactivate the Do Not Disturb, as such.
User guide
Contact us
www.cisco.com
Advertisement
Table of Contents
