Transferring An Ongoing Call - Cisco Profile Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents Getting started

Transferring an ongoing call

This is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.

If applicable, tap
the participant to
be put on hold (
If you are in a call with just
one, that is not needed.
Then tap Hold
Tap
Contacts
and select whom
to transfer to in the
usual way.
D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls

Tap the
participant's name

). again.

( )
If you are in a call with more than one, you
may also transfer the one on hold to the
other participant of the current call. If you do
so, you will be disconnected from the call,
but the others will stay connected.
Using directories In-call features In-call features
23
User guide
Settings Contact us
Tap Transfer.
www.cisco.com