Calling Participants To Add Them To An Ongoing Call (Multisite) - Cisco Profile Series User Manual

Cisco TelePresence System Profile Series, Codec C Series, Quick Set C20, MX200
Contents Getting started

Calling participants to add them to an ongoing call (Multisite)

Calling more than one using Multisite is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.
Repeat the procedure to include more participants,
if needed.
The maximum number of participants possible will
depend on the system used, consult your System
Administrator, if in doubt.
Note that even voice-only participants may be
added.
D14582.07 User guide Profile Series, Codec C Series, Quick Set C20, MX200, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Placing calls
While in a call ... then select, in the
you may add usual way, whom to
participants add to the ongoing
provided that your call.
system permits to
do so. Tap Add ...
Tap END to terminate the entire
conference. To disconnect just
one of the participants, tap the
participant's name along the
bottom line and then tap END.
Using directories In-call features In-call features
20
Settings Contact us
Once you have selected someone,
tap Start to include this participant
in the meeting.
www.cisco.com
User guide