Fan Blade Assembly - Hunter Ceiling Fans Installation And Operation Manual

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE
BRACKETS WHEN INSTALLING THE BRACKETS, BALANCING THE
BLADES, OR CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS
IN BETWEEN ROTATING FAN BLADES.

Fan Blade Assembly

1. Your fan may include blade grommets. If yout fan has grommets, insert them by hand into the
holes on the blades (see Fig. 13).
2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the
blades may appear slightly loose after the screws are tightened. This is normal (see Fig. 14).
Grommet
Blade
Fig. 1
Installation Of Fan Blade Assembly
1. Loosen the blade assembly screw, but do not remove.
2. Align the blade blase assembly screw with the Adapt Air blade shaft counter sink (see Fig. 15).
3. Slide the blade assembly onto the Adapt Air blade shaft. (see Fig. 16).
4. Before tightening the blade assembly screw, slightly turn blade assembly while hand tightening the
set screw.
5. Tighten the blade assemble screw with pliers or adjustable wrench.
Blade
Counter Sink
Adapt Air
Blade Shaft
Fig. 1
Hunter Fan Company
Fan Blade Assembly
! CAUTION
Fig. 1
Fig. 1
1
!
Blade Assembly
Screw
Blade Assembly
Screw
42761-01 • 07/09/07