Configuring Network Settings - Lantronix ManageLinx User Manual

Configuring Network Settings

To configure the initial network settings for the DSM, you connect to the unit with either a
VGA and keyboard connection or a serial connection to a laptop or other terminal.
1. Connect your interface device to the unit. The command line interface appears.
2. Log in using
menu appears.
Enter a Static IP Address:
1. Type 3 and press Enter. The STATIC MENU appears.
2. Type 2 and press Enter.
3. Enter the IP Address and press Enter.
4. Type 3 and press Enter.
5. Enter the Netmask in dot-quad format and press Enter.
6. To save, type 5 and press Enter.
7. To return to the main menu, type 1 and press Enter.
8. To configure the gateway, type 4 and press Enter.
9. Enter the Default Gateway address in dot-quad format and press Enter.
10. To save, type 5 and press Enter.
ManageLinx User Guide
as the user name and
sysadmin
3: DSM Installation
as the password. The following
PASS
14