TRITON has dual polyphonic arpeggiators, fully editable and syncable to MIDI clock. One program uses one arpeggio
pattern - Combi or Sequence modes use up to two arpeggio patterns at once.
Programs have an arpeggio pattern assigned to them even if the Arpeggiator [ON/OFF] key does not "wake up" in the
ON position. Example: Select Program A35 Arco Strings Press the Arpeggiator [ON/OFF] key so it is on (lit) Work
with the realtime controls: TEMPO, GATE (overall step length), and VELOCITY (loudness of arpeggiated notes) Press
the Arpeggio tab at the bottom of the screen Work with the Octave radio button, change the clock Reso (=Resolution),
check the Latch box.
To view the Arpeggiator grid, press the [GLOBAL] key, press [MENU], press P.6 User Arpeggio The procedure is
covered in the Owners Manual Basic Guide, pp. 100-105.
Combinations may have up tp two arpeggio patterns assigned to them even if the Arpeggiator [ON/OFF] key does not
"wake up" in the On position Example:Select COMBI A12, Bell Amis Note that Realtime controls affect both arps
globally Press the Arpegg. A or Arpegg. B tab at the bottom of the screen to work with individual parameters Press
the popup at the
Working with the TAP TEMPO Function:
Tap Tempo in Program Mode: Select Program A066, Wild Arp Hold down some notes on the keyboard, and press the
[ENTER] key 3 or 4 times at the desired tempo: The Metronome updates accordingly.
Tap Tempo in Combi Mode: Select Combi A102, The 16
press the [ENTER] key 3 or 4 times at the desired tempo: The Metronome updates accordingly
Tap Tempo in Sequence Mode: After creating a New Song and pressing the [REC/WRITE] key, press the [ENTER] key 3
or 4 times at the desired tempo: The Metronome updates accordingly
Tap Tempo of tempo-based Effects: Select Program B082, Space Pod for 2 Note that the [ARP ON/OFF] switch is off
Press the [ENTER] key 3 or 4 times at the desired tempo: the program's LFO and the BPM of Insert Effect 2
(algorithm 50: St. BPM Delay) both update to the tapped tempo.
Sequence mode: Creating songs quickly with Song Templates
Press the [SEQ] key Press the popup by ►S### (song number) and press any number not in use
response to the query "Create new song this Song # .
Press upper right popup ▼ and press "Load Template Song" Press the popup in the From: ► field and select one of
the P## templates by pressing it. Each song selection will load eight programs to the first eight tracks, and choose and
route appropriate effects.
Check the box "Copy Pattern to Track too?" Make sure that the pattern popup is set to "Preset"
by ►P### and select a Pattern in the same style as your Song Template choice Press the OK box 4 to 8 times, to
copy the pattern into the track for a number of measures, then press Exit Press the [START/STOP] key to audition the
copied drum pattern
When you press OK to copy the pattern, you can first select a new pattern to create a series of patterns in the track.
Press [LOCATE] to return to the to the beginning of the Song
to select Track 2 (except for the Orchestral Template, Track 2 is always Bass)
the [START/STOP] key, and record 2 to 4 measures
Pat: (Pattern) field and try substituting a different arp pattern.
Press the [START/STOP] key again to stop.
Strummert Hold down some notes on the keyboard, and
Press the popup at ► Track ## (beneath the Song #)
Press the [REC/WRITE] key, and then
When finished, press [START/STOP] to stop recording.
Press OK in
Press the popup