Chapter 3 - Using The Web Management Software; Navigating The Web Management Software - Multitech MultiModem rCell MTCBA-H-EN2 User Manual

Chapter 3 – Using the Web Management Software
Chapter 3 – Using the Web
Management Software
The Web Management software configures the Ethernet functionality of your router.

Navigating the Web Management Software

This section explains the menu structure and the navigation buttons of the router's Web Management software.
Menu Bar
Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote Configuration.
IP Setup:
Sets up the PPP authentication, dial-on-demand, router authentication, and Wakeup on Call.
PPP:
Defines networks and services to make them available to other functions such as allowed packet
Networks & Services:
filters, static routes, remote configuration, DNAT, and GRE tunnels and routes.
Defines filter rules, DNAT configuration, and ICMP rules.
Packet Filters:
Generic Routing Encapsulation (GRE). Defines the remote network and the tunnel through which traffic is to
GRE Tunnels:
be routed.
Configures the DHCP server settings.
DHCP Server:
Sets DDNS Force Update and Reset router, displays Service Status, and provides screens for
Tools:
Firmware Upgrade, Load Configuration, and Save Configuration.
Shows statistics and logs maintained by the router.
Statistics & Logs:
Saves your settings and reboots your router.
Save & Restart:
Accesses the online Help text.
Help Index:
IMPORTANT NOTE ABOUT SUBMIT AND SAVE & RESTART
Click the Submit button located at the bottom of most screens in order to save any changes you make.
Then you must click the Save & Restart button, located on the Menu bar, in order for your settings to take effect. Save &
Restart does not have to be executed after each screen; you can change and Submit several screens, and then click Save &
Restart.
20 Multi-Tech Systems, Inc. MultiModem rCell User Guide