Gxv3615 Series Networking Page - Grandstream Networks GXV3615 User Manual

GXV3615 IP Camera Series
to show the incremental difference between each frame. I-frames are used to help keep the
video looking normal. When intervals are shorter, the video quality is higher but uses more
bandwidth.
NOTE: The users might need to configure the Primary Stream and Secondary Stream
properly. Sometimes, the user might like to watch the live video stream from the web GUI in
low resolution mode while recording a copy via GSurf/GS_NVR in high resolution due to the
limitation of internet bandwidth. In this case, for example, primary stream can be configured
to have better resolution, and then the users can use primary stream to record while watching
secondary video streams.
Audio Settings
Preferred Audio Codec – The GXV3615
supports up to 3 different Vocoder types,
a-law (PCMA), u-law (PCMU) and G.726.
The audio can also be turned off by
switching the setting to "Disabled"
Audio Compression – Audio
compression is a form of data
compression designed to reduce the size
of audio files. Usually, the higher the audio compression is, the better the audio quality is.
Microphone Volumne – Adjust the volume of build-in microphone.
Speaker Volumne – Adjust the volume of build-in speaker.
– Assign an IP to GXV3615

GXV3615 Series Networking Page

GXV3615 supports IP version 4. The IP address can set automatically via DHCP, or a static
IP address can be set manually. To make GXV3615work properly, the user needs to set the
DNS configuration properly. For security purposes, the user can also assign the GXV3615 an
HTTP Port other than 80.
IP Address Configuration
The GXV3615 operates in two modes:
Dynamically Assigned via DHCP – all the field values for the Static IP mode are not used.
The GXV3615 acquires its IP address from the
first DHCP server it discovers on its LAN.
Statically Configured as – configures all of
the following fields: IP address, Subnet Mask,
Default Gateway IP address, DNS Server 1
(primary), DNS Server 2 (secondary). These
fields are set to zero by default. Static IP
Firmware 1.0.4.8 Page 15 of 28
Grandstream Networks, Inc. 11/29/10