Cleaning And Maintenance - Grace m802 Owner's Manual

20Hz-20kHz
"A" weighting
1kHz, -1dBFS, 20Hz-22kHz
Frequency response
44.1kHz Fs
48kHz Fs
88.2kHz Fs
96kHz Fs
176.4kHz Fs
192kHz Fs
60Hz
1kHz
10kHz
IMD SMPTE 4:1 60Hz, 7kHz, -3dBFS
44.1-48kHz
1kHz, -1dBFS, 20Hz-22kHz
Wide lock mode
s-Lock™ mode
Wide lock mode
s-Lock™ mode
Wide lock mode, -3dB, 12dB/octave
s-Lock™ mode, -3dB, 12dB/octave

Cleaning and Maintenance

Your m802 amplifier chassis is constructed out of high quality stainless steel. Under normal circum-
stances, virtually no maintenance is required to keep the unit looking shiny and new. However, if your
unit becomes smudged or dirty, here are some cleaning tips: We recommend using either Pledge fur-
niture polish or Zep brand stainless steel cleaner (available at the hardware store). Apply cleaner to a
clean, dry, lint free cloth and gently wipe all stainless surfaces, taking care not to allow the cleaning
product to build up around the panel switches or knobs. Your m802 will clean up very nicely, again to
be the crown jewel of your equipment rack.
grace design m802
24
owner's manual
A/D CONVERTER SPECIFICATIONS
DYNAMIC RANGE
THD+N
+/-0.2dB
5Hz-21kHz
5Hz-23kHz
5Hz-41kHz
5Hz-45kHz
5Hz-54kHz
5Hz-59kHz
Full scale input level
+16dB or +24dB (+/-2dB trim)
CMRR
Interchannel crosstalk
<120dB
GROUP DELAY
MAXIMUM NON-HARMONIC SPURIUS TONES
Sample rates, internal crystal
44.1, 48, 88.2, 96, 176.4, 192(kHz)
EXTERNAL CLOCK LOCK RANGE
INTRINSIC JITTER, 200HZ-20kHz BW
JITTER REJECTION CORNER FREQUENCY
< 0.00026% (-112dB)
<100dB (0.0008%)
40.1kHz-207kHz (+/-8% at each sample rate)
+/-250ppm (+350, -400ppm typical)
>115dB
>117dB
-3dB
22kHz
24kHz
44kHz
48kHz
72.5kHz
79kHz
>65dB
>80dB
>60dB
13/Fs
<-130dBFS
< 60ps RMS
< 40ps RMS
800Hz
10Hz