Grandstream Networks Grandstream HandyTone HandyTone-488 User Manual page 23

HandyTone-488 User Manual
WAN side http
access:
PSTN access code:
Admin Password
SIP Server
Outbound Proxy
SIP User ID
Authenticate ID
Authenticate
Password
Name
Register
Expiration
Local SIP port
Local RTP port
Enable Call
Features
Send DTMF
No Yes
(WAN side access to http server will be rejected if set to No)
Update
All Rights Reserved Grandstream Networks, Inc. 2004
This contains the password to access the Advanced Web Configuration
page. This field is case sensitive.
SIP Server's URI or IP address
SIP Outbound Proxy Server's URI or IP address
SIP service subscriber's User ID
SIP service subscriber's Authenticate ID. Can be identical to or different
from SIP User ID
SIP service subscriber's account password
SIP service subscriber's name which will be used for Caller ID display
This parameter allows the user to specify the time frequency (in
minutes) the HandyTone ATA refreshes its registration with the
specified registrar. The default interval is 60 minutes (or 1 hour). The
maximum interval is 65535 minutes (about 45 days).
This parameter defines the local SIP port the HandyTone ATA will listen
and transmit. The default value for FXS port is 5060. The default value
for FXO port is 5062.
This parameter defines the local RTP-RTCP port pair the HandyTone
ATA will listen and transmit. It is the base RTP port for channel 0. When
configured, channel 0 will use this port _value for RTP and the
port_value+1 for its RTCP; channel 1 will use port_value+2 for RTP and
port_value+3 for its RTCP. The default value for FXS port is 5004. The
default value for FXO port is 5008.
Default is No. If set to Yes, Call Forwarding & Do-Not-Disturb are
supported locally
This parameter controls how DTMF events are transmitted. There are 3
ways: in audio which means DTMF is combined in audio signal (not very
reliable with low-bit-rate codec), via RTP (RFC2833), or via SIP INFO.
(key pattern to use the PSTN line, default is "*00")
23
Grandstream Networks, Inc.