Graco Hydra-Clean 308-532 Instructions-Parts List Manual page 4

12.5 hp engine 3500 psi (241 bar) / 3900 psi (269 bar) operating & maximum working pressure & 16 hp engine, 4000 psi (276 bar) operating & 4300 psi (296 bar) maximum working pressure
Table of Contents

Advertisement

MOVING PARTS HAZARD
Moving parts can pinch or amputate fingers or other
body parts. KEEP CLEAR of moving parts when
starting or operating the pressure washer.
NEVER operate the pressure washer without all guards
and interlocks installed and functioning. Follow the
TERMS
WARNING: Alerts user to avoid or correct conditions
that could cause bodily injury.
NOTE:
Identifies helpful procedures and information.
United States Government safety standards have been adopted under the Occupational Safety and Health Act. These
standards—particularly the General Standards, Part 1910, and the Construction Standards, Part 1926—should be
consulted.
308–532
Pressure Relief Procedure
servicing the pressure washer to prevent discharging
high pressure fluid from the gun.
CAUTION: Alerts user to avoid or correct conditions
that could cause damage to the equipment.
IMPORTANT
before checking or

Advertisement

Table of Contents
loading

This manual is also suitable for:

800-706800-707Hydra-clean 3540Hydra-clean 4043

Table of Contents

Save Article as PDF