1 Camera bottom case
2 Tilt adjustment bracket and
thumbnuts, notches(X2)
3 Inner liner
Routine Maintenance
The dome cover is an optical part. Use a soft, dry cloth to remove any
fingerprints or dust.
Clean the camera housing with a soft, dry cloth. For more stubborn stains, use
a cloth dampened with a small quantity of neutral detergent, then wipe dry.
Caution
Connector Pin Definition
VIDEO OUT is not available.
Do not use volatile solvents such as alcohol, benzene or
thinners to avoid damaging the surface finish.
Return to factory default by pressing button
for 5 seconds
System re-start
4 Loosen the screw to take off camera
housing
5 Camera housing
6 Dome cover
7