1 Camera bottom case
2 Tilt adjustment bracket and
thumbnuts, notches(X2)
Notches (x2)
3 Inner liner
Routine Maintenance
Ÿ
The dome cover is an optical part. Use a soft, dry cloth to remove any
fingerprints or dust.
Ÿ
Clean the camera housing with a soft, dry cloth. For more stubborn stains, use
a cloth dampened with a small quantity of neutral detergent, then wipe dry.
Do not use volatile solvent s such as alcohol, benzene or
Caution
thinners to avoid damaging the surface finish.
Connector Pin Definition
VIDEO OUT is not available.
4 Loosen the screw to take off camera
housing
5 Camera housing
6 Dome cover
Return to factory default by pressing button for 5
seconds
System re-start
7