Factory Settings; Auto Level; Maintenance Screen - JVC TK-C9200U Menu Setting

MAINTENANCE Screen

CCD SPOT CORRECTION
Compensates for white spots on the CCD. Press the [SET] button to display the
items for selection.
[Items for selection : CANCEL, EXECUTE]
CANCEL : Returns to the MAINTENANCE screen.
EXECUTE : Executes white spot compensation on the CCD.
Memo Attach the lens cap before executing white spot compensation on the CCD. Also,
turn on the power for 30 minutes to warm up the camera before execution.

FACTORY SETTINGS

The values set on the menu screen are returned to the default settings. Press the
[SET] button to display the items for selection.
[Items for selection : CANCEL, CLEAR(W/O TITLE), CLEAR(ALL)]
CANCEL
CLEAR(W/O TITLE) : Returns setting values except for TITLE to the default.
CLEAR(ALL)
DAY/NIGHT Screen (TK-C9300U/E, TK-C9301EG)
D/N MODE
Sets the displayed video when the Day/Night function is set to "ON" or "AUTO".
When set to "B&W", the IR cut filter is switched off and the sensitivity is increased.
[Setting values : B&W (black-and-white), AUTO (black-and-white/color)] (Default value: AUTO)
Memo When the DAY/NIGHT selector switch is set to "OFF" or [AUX
FUNCTION] is set to "IN : D/N", [D/N MODE] cannot be set.

AUTO LEVEL

Sets the brightness level where the camera will switch between color and black-and-white.
[Setting values : DARK, NORMAL, BRIGHT] (Default value: NORMAL)
AUTO TIME
Sets the detection time of the brightness level. The camera switches between color and
black-and-white when the brightness level is detected after the selected period of time.
[Setting values : 0s, 10s, 20s, 30s] (Default value: 30s)
: Returns to the MAINTENANCE screen.
: Returns all setting values to the default.
ADVANCED MENU
11