Table of Contents
Advertisement
Hussmann® Impact™ Hot Food Merchandiser
3. Align the top extrusion and insert Joining Plate (Item 7).
4. Use 8-18 x 3/8 Truss Head SM Screws (Item 8) to fasten the plate using the predrilled pilot holes
as shown below.
5. Align the Rear Sill and attach Joining Bracket (Item 9) with 10-24 x ½ Washer Head Machine
Screws (Item 10). Use only specified fasteners. Longer screws will penetrate the Rear Sill
causing damage.
18
Installation
Advertisement
Table of Contents
