Ikegami LCM-205N Instruction Manual page 14

CONTROLS AND FUNCTIONS
Auto Switch CH:
"Motion Detect" : Change from Default CH to Switch CH with PIR sensing
Display CH
Motion Detect
The built – in camera is activated at AV1 Mode only
"Timer" : Swap between Default CH and Switch CH with selected input source
during set "Switch time".
Default CH
Display CH
Switch time
(
The built – in camera is activated at AV1 Mode only
"OFF" : Disable "Motion Detect" and "Timer".
16 ------------------------------------------------------------------------------------------- INSTRUCTION MANUAL
Select "Motion Detect", "Timer" or "OFF" (Default Mode: OFF)
Return from Switch CH to Default CH without PIR sensing
(Switch time after)
Default CH
ON
(Switch time)
Switch time)
Switch CH
(Switch time)
Switch CH Default CH
(Switch time)
Default CH