Apply Policies To Switch Ports - Dell S4810 Configuration Manual

FTOS(conf-pg)#priority-list 4
FTOS(conf-pg)#set-pgid 1
FTOS(conf-pg)#exit
FTOS(conf)#priority-group OTHER
FTOS(conf-pg)#priority-list 0-3,5-7
FTOS(conf-pg)#set-pgid 2
FTOS(conf-pg)#exit
FTOS(conf)#dcb-output ets
FTOS(conf-dcb-out)#priority-group iSCSI qos-policy iSCSI
FTOS(conf-dcb-out)#priority-group OTHER qos-policy OTHER
FTOS(conf-dcb-out)#exit
FTOS (conf)#service-class dynamic dot1p
3.5

Apply policies to switch ports

FTOS(conf)#interface range ten 0/0 – 47
FTOS(conf-if-range-te-0/0-47)#dcb-policy input pfc
FTOS(conf-if-range-te-0/0-47)#dcb-policy output ets
FTOS(conf-if-range-te-0/0-47)#protocol lldp
FTOS(conf-if-range-te-0/0-47-lldp)#exit
FTOS(conf-if-range-te-0/0-47)#exit
FTOS(conf)#interface range fortyGigE
FTOS(conf-if-range-fo-0/48-60)#dcb-policy input pfc
FTOS(conf-if-range-fo-0/48-60)#dcb-policy output ets
FTOS(conf-if-range-fo-0/48-60)#exit
12 SCG1000 Force10 S4810 Configuration Guide
0/48 - 60