Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rosewill RC-221
Summary of Contents for Rosewill RC-221
- Page 1 RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual...
- Page 2 RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual Important Message to RAID User: 1. Before the installation of controller card, please to study the PDF file of SATA Raid manual at enclosed CD folder \ SATA Raid_2Port \ SiI3x12 \ Win98_me_2000_xp_nt4.0 \ Gui first.
-
Page 3: Package Contents
RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual 1.1. Features 1.1.1. PCI Interface Compliant with PCI Specification, revision 2.2 Integrated PCI DMA engines. 32 bit, 33/66MHz fully compliant PCI host interface. 1.1.2. High Speed Serial ATA Interface Dual high speed Serial ATA ports, each supporting 1st generation Serial ATA data rates (1.5Gb/s). - Page 4 RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual Disk Striping (RAID 0) Striping is a performance-oriented, non-redundant data mapping technique. While Striping is discussed as a RAID Set type, it is actually does not provide fault tolerance. With modern SATA bus mastering technology, multiple I/O operations can be done in parallel, enhancing performance.
-
Page 5: Deleting Raid Sets
RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual 3.2. Creating Mirrored Sets (RAID 1) 1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility. 2. Select Create RAID set. Press Enter. 3. Select Mirrored then press Enter. -
Page 6: Software Installation
RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual 4. Software Installation 4.1. Windows 98/98SE Driver Installation For New Windows 98/98 SE Systems (Fresh Installation) 1. After the SATA RAID PCI Host Adapter and attached drives are configured, follow Microsoft procedures to install Windows accordingly. - Page 7 RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual 2. Once Windows has been installed, click My Computer, then click Properties. Click Device Manager tab. 3. Double click Other Devices then PCI RAID Controller. 4. Click Driver tab, then Update Driver.
-
Page 8: Windows Nt 4.0 Driver Installation
RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual 4.3. Windows NT 4.0 Driver Installation For New Windows NT 4.0 System (Fresh Installation) Before installation, copy all the files under directory E:\SATA Raid_2Port\ Sil3x12\ Win98_me _2000_xp_nt4.0\ driver\ *.* to a blank floppy disk 2. - Page 9 RAID External 2Ports Low Profile PCI Adapter RC-221 User Manual 4. Insert the Driver diskette. Press S, then press Enter. 5. Select Silicon Image Sil-3x12 SATA Raid Controller Driver and press Enter. 6. Press Enter to continue and follow on-screen instructions to complete installation.
- Page 10 4. A message This device is working properly is displayed in the dialog box, the driver has been correctly installed. Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product.
Need help?
Do you have a question about the RC-221 and is the answer not in the manual?
Questions and answers