Rosewill RC207 User Manual
Rosewill RC207 User Manual

Rosewill RC207 User Manual

Sata ii-3gb 2-port pcie adapter

Advertisement

SATA II –3GB 2-Port PCIE Adapter RC207
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RC207 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rosewill RC207

  • Page 1 SATA II –3GB 2-Port PCIE Adapter RC207 User Manual...
  • Page 2: Package Contents

    SATA II –3GB 2-Port PCIE Adapter RC207 User Manual 1. Introduction This Low Profile PCI Host Adapter is a PCI-Express controller board to support Low profile PCI and regular size PCI both in one card. The card can upgrade your desktop computer to have 2 ports Serial ATA transfer rate of 3 Gb/s (300 MB/s).
  • Page 3: Software Installation

    SATA II –3GB 2-Port PCIE Adapter RC207 User Manual Feature to some model) 2. Software Installation 2.1. Windows NT 4.0, Windows 2000/XP or Windows Server 2003 Fresh OS installation Follow the instructions in this section if you are performing a new installation of Windows NT 4.0, 2000/XP, Server 2003 and you wish to boot from a device attached to the SATA port.
  • Page 4 SATA II –3GB 2-Port PCIE Adapter RC207 User Manual verify controller was installed correctly. 2.3. Adding the HBA to an existing Windows 2000/XP or Windows Server 2003 installation Power off the system. Insert SATA Card into an available PCI Express slot. Power up the system.
  • Page 5 ‘Yes’ to reboot your system when necessary. 4. See instructions in section 2.4 to verify controller was installed correctly. Thank you for purchasing Rosewill Product. Please register your product at www.rosewill.com for complete warranty information and future support for your product.

Table of Contents