SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter Included in the Kit The USB to SATA/IDE Cable Adapter Complete Kit includes the items listed below.
Page 3
User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 Many Operating Systems immediately indicate that the USB Cable Adapter and drive have been recognized and if the drive is already formatted and partitioned in a compatible file structure the drive will automatically mount itself.
SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 User Manual DATA while the smaller, 4 pin connector is for Drive Power. Plug in the Drive Power connector. This connector has cut corners and must be installed with the correct orientation. Make sure the power switches are in the off position and that the LED’s in the switch box are not illuminated.
SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 User Manual After your finish this initialization process the drives will then be ready to use. Again, every system is slightly different especially when it comes to RAID and RAID levels. Read the documentation carefully before putting important data on your system.
SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 Package Contents RCW-608 User manual X Power cord X Power adapter X SATA cable Driver disc X Silicon protection case for 2.5” hard drive X Silicon protection case for 3.5”...
Page 7
SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 User Manual c. 3.5" SATA hard drive SATA cable d. 5.25" ATAPI device ATAPI device 2. Connect the power adapter set.
Page 8
User Manual SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 3. Plug the power adapter to your ATA/ATAPI/SATA device. Please check a to d as below. a. 3.5" ATA b. 2.5" ATA There is no additional power needed for 2.5” HD.
Page 9
SATA or IDE 3-in-1 (5.25”, 3.5”, 2.5”)to USB2.0 Cable Converter Adapter RCW608 4. Plug the power adapter to power source and turn on the power (Please make sure the voltage is between 00~240V) 5. Plug the USB2.0 cable to PC and wait for PC auto-detection.
Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com/ for complete warranty information and future support for your product. If you have any question while using our products, please feel free to contact us at feedback@rosewill.com. User Manual...
Need help?
Do you have a question about the RCW608 and is the answer not in the manual?
Questions and answers