Rosewill RCAD-11001 User Manual

VGA to HDMI Adapter RCAD-11001
Installation Installation

Quick Installation Guide

Q2. Installation Set Up Your Resolution (For LED status is blue flashing) Introduction
LED is flashing and I got no picture on my screen, what happen?
Ans :
1. Connect the VGA only end of cable to VGA port on the computer/laptop. The VGA to HDMI Bridge(Rosewill VGA to HDMI Adapter) is designed to convert Please open "Control panel", then you select "Appearance and personalization".
Equipments need for installation
Step6 Step1
Step4
Please select
2. Connect the included Audio cable to the audio out port on the computer video (analog signal) and audio signals from a PC or Laptop to digital HDMI output Then select "Adjust screen resolution". Under resolution, please select
Other side of 3-1 Composite Cable has one Take out HDMI cable that comes with
Step1
Please select project in both screens.
1024x768 for first time
3. Connect Pig-Tail end of VGA cable to Rosewill VGA to HDMI Adapter unit. of wide-ranged HDTV and PC resolutions, up to 1080p. The Rosewill VGA to HDMI 1024X768. Wait for few seconds for HDMI to sync with your PC.
VGA port. Take that VGA Rosewill VGA to HDMI Adapter out and connect
For Win XP or older, on Desktop
(Because some of notebook will not send out
4. Connect the USB cable to USB port on the computer (for power purpose) Adapter is a plug and play device, automatically sensing the native resolution of the LED should be solid all time. Then you will see your screen. If you want to
Rosewill VGA to HDMI Adapter device. to your TV or monitor.
mouse press right button→Property
• TV or monitor (HDMI port)
VGA signal unless you do so,
5. Connect the HDMI port to TV or monitor, and other end to Cable to HDMI unit. display and converter the computer's output to digital signal. The device will detect select other resolution, please reference what your PC or laptop supports
→Setting then set resolution to
EDID displays and show the exact resolution. 6. See picture below for correct installation. output resolutions and monitor or TV supports input resolutions. Please noted,
800x600, click "apply".
The converter will take audio signal from the computer and embedded it into the only both sides supported resolution will be shown on the screen.
On Win7, choose Resolution after
HDMI signal output, so that you are able to enjoy both audio and video through
Step5
right click on the desktop.
Q3.
one cable. If for some reasons unknown Answer 2 did not work, what should I do?
1. Signal sending out needs several seconds,
Ans :
It supports multiple resolutions up to 1920x1080@60Hz. The Rosewill VGA to HDMI (1). please double check on the cable connection, sometimes is confusing on
Step2 Congratulation!!! You made it!!! You can enjoy playing any video
please be patient.
Step7
Adapter is USB powered therefore, will not require additional power supply. VGA cable side. Please connect the only VGA connector side to the
or movies from your Laptop or PC to your HD TV or monitor.
Connect the other side of HDMI cable to
2. If still no screen, check connection again.
Computer Composite Cable
• Computer or notebook
Check status LED on Rosewill VGA to HDMI
device. Connect the pig-tail VGA, USB and audio side to the PC.
Rosewill VGA to HDMI Adapter device.
3. If you see blue solid LED on device, then
Note
(VGA port is needs on pc or notebook)
Feature
Adapter
(2). Please restart computer, some graphic card require restart to sync video
means your TV doesn't support current
**Please note that this converter does not up/down convert the signal. Essentially,
• Display VGA signal out of Laptop or Desktop to a HDTV or Monitor
LED Status with monitor. Description
Set Up
resolution.
the resolution (supported by this device) that passes through the converter is the
• Audio Compatible, the converter will take audio from the computer and embedded No light (3). If described answer2 and 3 still doesn't work, please visit rosewill.com for No Power
*Note: If you are using desktop computer, your set up is completed. You should be
1. You can hot plug for installation. After you connect the unit correctly, you should
same resolution that goes out. Any aspect ratio control must be done directly from
Flashing Power go thru
it to the HDMI output along with video signal further helps.
able to see your screen with in 5 seconds. If you want to use other resolution,
see blue LED on the unit flashing. That means units is powered but not yet sync
Step6
your HDTV or source. **
Solid HDMI signal sync
• Smart Firmware in the converter allows any PC resolution to be converted to a
you can choose now. If TV or monitor goes blank screen then your TV probably
with HDMI. (If you see solid blue LED and no screen on the TV probably means
If everything is right, then you will see both
**This VGA to HDMI Bridge is not a scaler or scan converter. **
Q4.
native resolution of the display up to 1080p If my PC graphic card support 1080P but my monitor doesn't, can I still enjoy
doesn't support that resolution.
• Composite Cable your TV doesn't support that resolution you choose. Please check TV manual for
screens on. **Please check your manual and the Video Card's Control Panel to see if your
• Supports resolutions of up to 1920 x 1080 1080p performance?
Step3
Step8
what resolution it supports.)
○ 1 VGA(connect to VGA 2 HDMI)
laptop allows you to display both its monitor and another output. **
Ans :
• HDMI, HDCP and DVI compliant no, because we are converting the analog signal to digital signal. We are not
Take out 3-1 composite cable.
2. Right click mouse on the Window screen and choose "Screen Resolution" or
Step2 Installation finished. Check LED tatus dark, ○
Audio(to Audio port on Comp.)
2
**In order to display a pixel by pixel image your video card has to be able to
• USB Powered scaling signal up or down. To support a particular resolution, both PC or
Composite Cable VGA
"Display Property" you will see a screen like this.
flashing or solid. ○ 3 VGA(to VGA port on Comp. )
(if you are using a notebook)
support the output esolution. Some video cards can't output HD resolutions
• VGA, Audio and USB pig-tail cables are attached to the bridge notebook graphic card and monitor or TV has to support this resolution to able
Please select 1024x768 to make sure this unit running properly. Please wait for
VGA port on computer or notebook.
Looking for "Fn" and "F5"(switch monitor) (If LED is solid, you are good to use.)
USB(to USB port on Comp. )
○
4
so you may need to check your manual. **
• Plug & Play to see. If PC or notebook has an on-board graphic card, since it does not
few second before signal sync with HDMI TV or monitor (Because some of the
(Different notebook could have different
(If not, please follow set up procedure next.)
support very wide range of resolutions, we recommend to use 1024X768 or
notebook can't send out certain resolution signals due to graphic card issues but
function key)
Q&A
Product Requirement
Step4 720p instead of trying 1080p right away.
almost 100% of them support 1024X768. If you can see the screen then the blue
• Windows 2000, XP, Vista, Windows 7
Composite Cable USB
LED on the unit will led up solid. If you see blank screen but blue LED is solid that
If you see solid LED and no screen on the TV probably means your TV doesn't
Q1.
After completing installation, how do I know if it works?
Q5.
• Computer w/VGA connection that supports for the following resolutions: I already use this unit and video port is used up, I want to use more displays.
Step3
USB port oncomputer or notebook.
means your monitor or TV probably don't support that resolution you choose.)
Ans : support that resolution you choose.
If USB is powered up the unit, you will see blue LED flashing.
640X480(VGA),720X400, 800X600(SVGA), 1360X768(Wide XGA), 1024X768(XGA), What can I do?
Holding "Fn" and "F5" for switching monitor.
After it works with 1024x768 then you can choose whatever you prefer for your
Please check TV manual for what resolution it supports.
After HDMI signal sync with PC, the blue LED will stay led up.
Ans :
1280X720(HDTV 720P), 1280X768(WXGA),1440X900(WXGA+), 1280X1024(SXGA), Rosewill has another product called "Rosewil USB to HDMI Adapter".
resolutions unless your TV or PC can not support.
1680X1050(WSXGA+), 1600X1200(UXGA), 1280X800(WXGA), 1280X960(Quad VGA), You can use USB port to gain extra video sources to display.
• HDMI CABLE
Step5
1920X1080(Full HD), 1920X1200(WUXGA) So you don't have to buy another expensive graphic card.
Composite Cable Audio
• TV with HDMI connector that supports 1280X720P, 1920X1080P
Audio port on computer or notebook.
Congratulation!!! Now you can enjoy your show or movie on your big screen Video
complete warranty information and future support for your product.
Display.
connect to
○ 1
VGA to HDMI
Adapter
○ 3
connects to
○ 4
connects to
VGA to HDMI Adapter
○ 2
connects to
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for
HDMI Cable
○
2
○ 3
○ 3
○
4
○
4
○
2
1 2 4 5 6 3 7 8 9
User Manual
○
1
TV or Monitor
○ 1
○
3
○
4
RCAD-11001
User Manual
○
2