Clarion M502 Owner's Manual & Installation Manual page 10

SiriusXM Satallite Radio Operations
1. While listening to a SiriusXM channel, press
[ ] on the remote control to enter Replay
mode. The display will show "PAUSE" when
entering this mode.
2. Press [CONTROL] knob (down) or press
[ ] button to resume playback of the
stored audio from the point at which it was
paused.
During playback,the SiriusXM Tuner will
continue to store the channel audio until
you exit the Replay mode.
During REPLAY playback:
• Fast rewind: Press and hold [CONTROL]
knob (left), or press and hold [ ] on the
remote control.
• Fast forward: Press and hold [CONTROL]
knob (right), or press [ ] on the remote
control.
• Returning to the beginning of the current
song: Press [CONTROL] knob (left), or
press and hold [ ] on the remote control.
(If you press [CONTROL] knob (left), or
press [ ] on the remote control. in the
first 2 seconds of a song, you return to the
beginning of the previous song.)
• Advancing to the beginning of the next
song: press [CONTROL] knob (right) or
press and hold [ ] on the remote control.
3. Press [BAND/TOP] to finish Replay mode.
Notes:
• If you continue to press [CONTROL] knob
(right), or press and hold [ ] on the
remote control. until the end,the Replay
mode is canceled, and the unit will change
to live SiriusXM radio mode.
• If you change channels while in Replay
mode,the unit will exit Replay mode to
live Satellite mode and clear the Replay
memory.
• Replay mode is being kept when you
change the source other than SiriusXM
mode.
iTunes song tagging
With iTunes song tagging, you can tag songs
you hear while listening to SiriusXM Satellite
Radio. The tagging information is saved in
10
M502
your radio until you connect your iPod or iPhone
and then the tagging information is transferred
to your iPod/iPhone. When your iPod/iPhone
to iTunes, you will then be able to preview and
purchase the song that you heard while listening
to SiriusXM Satellite Radio.
Information on using the iTunes song tagging
feature is described below.
1. A song may be tagged while listening to a
SiriusXM channel if the display shows the
"TAG" icon.
2. Press and hold [CONTROL] knob (down)
or press [ISR] button on the remote control
while the desired song is playing.
3. When completed, "STORED TAG X OF 64"
is displayed.
X means the number of tag stored.
Notes:
• During tagging, the iPod/iPhone takes
priority to save the tag information.If no iPod/
iPhone is connected, the tag information is
saved to this unit.
• This unit can store up to 64 pieces of tag
information. When the memory of the unit is
full, "MEMORY FULL" may be displayed.
• When iPod/iPhone that doesn't support the
tagging function is connected, "TRANSFER
FAIL" may be displayed.
• If there is stored tag information on the
unit, when an iPod/iPhone supporting the
tag function is connected, the stored tag
information will be transferred to iPod/iPhone
automatically.
• If tag information already exists, "ALREADY
TAGGED" will be displayed when you try to
tag information again.
• Tagging may be canceled by changing the
frequency or station.
• If a song is tagged and the remaining storage
volume of the connected iPod/iPhone is
sufficient to hold the song's tag information, it
will be saved on the iPod/iPhone.
Changing the Display
Text information, such as the channel name,
artist name/feature, song/program title and
SiriusXM Satallite Radio Operations
content is available with each SiriusXM
channel. The unit can display this text
information as explained below.
1. In SiriusXM mode, press [DISP] button on
the remote control.
Each time you press this button, the
display changes as shown below.
Band/Channel number/channel name =>
Artist Name => Song Title=> Content Info
=> Category Name => Clock => Band/
Channel number/channel name
* If there is no text information,nothing will
be displayed.
Parental Lock / Unlock
The SiriusXM Parental Control feature allows
you to control access to channels that you
consider inappropriate for younger listener.
When enabled, the Parental Control feature
requires you to enter a password to tune to
the locked channels. Information on setting
up the password, setting up the channels
to be locked, and the method to access the
locked channels is described below.
1. Long-press [CONTROL] knob and select
ADJUST, then press [CONTROL] knob to
enter and press [CONTROL] knob (right)
to select "PARENTAL PASSWORD".
P r e s s [ CONTROL] k n o b t o c h a n g e
password. Enter old password, new
p a s s w o r d . T o e n t e r c o d e , r o t a t e
[CONTROL] knob to decide number and
[CONTROL] knob (left/right) to select digit.
Each time you need to press and hold
[CONTROL] knob to confirm password.
( O r i g i n a l p a s s w o r d i s " 0 0 0 0 " , a f t e r
input four numbers, then long-press the
[CONTROL] knob)
2. Long-press [CONTROL] knob and select
ADJUST, then press [CONTROL] knob
to enter and press [CONTROL] knob
(right) to select "LOCK CH" and press
[CONTROL] knob to start to lock channel.
You will be asked to input password. Enter
password and "LOCK" will be displayed if
it is successful.
3. Long-press [CONTROL] knob and select
ADJUST, then press [CONTROL] knob to
enter and press [CONTROL] knob (right) to
select "UNLOCKCH". Enter password and you
can unlock the channel.
4. For accessing the locked channels, select
channel by "DIRECT SELECT".
Press and hold [CONTROL] knob (center
long press), and rotate the [CONTROL]
knob to choose ADJUST, then to choose
the "SEARCH", and rotate [CONTROL]
knob to select "DIRECT SELECT" and press
[CONTROL] knob. Input desired locked
channel (need to input 3 digit) and input
password, then you can tune to that locked
channel.