Cutting Crown And Cove Moldings - Makita LS1211 Instruction Manual

6. Cutting crown and cove moldings
+
.Crown and cove moldings can be cut on a compound miter saw with the moldings laid
f l a t on the turn base.
*There are two common types of crown moldings and one type of
cove molding:
52/38" wall angle crown molding, 45" wall angle crown molding and 45" wall angle
cove molding. See illustrations below.
Cei I I ing Ceilling
52/38" type
crown molding
45" type
crown molding
45" type
cove molding
.There are crown and cove molding joints which are made to
frt
"Inside" 90" corners
(
@ and @ In Fig.
A)
and "Outside" 90" corners
(0
and
@
in Fig A )
38" or 45"
w
-
inside corner
Outside corner
F i g .
U
inside corner
I 7