Minimum Gauge For Cord Sets; Extension Cords - Makita LS1211 Instruction Manual

16.
EXTENSION
CORDS.
Make sure your extension cord is i n good condition.
When using an extension cord, be sure to use one heavy enough to carry
the current your product w i l l draw. An undersized cord
will
cause a drop
in line voltage resulting in
loss of
power and overheating. Table
1
shows the
correct size to use depending on cord length and nameplate ampere rating.
If
in doubt, use the next heavier gauge. The smaller the gauge number, the
heavier the cord.
TABLE 1
MINIMUM GAUGE FOR CORD SETS
Total Length of Cord in Feet
0 -
6
6 -
10
10
-
12
12
-
16
I
0 -
25
I
26 - 50
I
51
-
100
I
101
-
150
18 16 14
18 16
16 16 14 12
14 12 Not Recommended
:t
I
12
Ampere Rating
More Not M O W
Than Than
A W G
VOLTAGE WARNING: Before connecting the tool t o a power source (receptacle,
outlet, etc.) be sure the voltage supplied is the same as t h a t specified o n the
nameplate of the tool. A power source w i t h voltage greater than t h a t specified
for the tool can result i n SERIOUS INJURY t o the user
-
as well as damage t o
the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source w i t h
voltage less than the nameplate rating is harmful t o the motor.