iSimple blustream Owner's Manual page 7

1. Settings - Allows you to perform a search for other Bluetooth enabled
devices, adjust the handsfree volume, adjust the microphone volume,
adjust the A2DP volume, adjust the ringer volume, & reset the
interface.
2. Devices - Allows you to see a list of paired devices as well as switch
between paired devices. The device which is active at the time will
be represented with an [A] next to the device name. If there is no
active device at the time there will not be an [A] present.
3. Remove - Allows you to delete paired devices
Menu Function Example: Adjusting the Ringer Volume. This
procedure can also be used to adjust Microphone, Handsfree,
Ringer and Streaming Audio (A2DP) volume.
>Press Preset 6 while in Bluetooth mode to enter the menu.
>Radio displays "Settings".
>Press PRESET 6 to select Settings.
>Radio displays "BT Search".
>Press SEEK >> until "Ring" is displayed.
>Press PRESET 6 repeatedly to adjust the ringer volume. Once the
volume has reached its max limit it will roll back to one and begin to go
up again.
A2DP Streaming Audio
A2DP Streaming Audio allows you to stream audio wirelessly from your
iPhone. (iPhone MUST have firmware 3.0 or higher. First generation
iPhones do not support A2DP streaming audio). To stream audio to your
radio you must be in Bluetooth mode.
1. Play/Pause - Allows you to play/pause A2DP audio with the touch of a
button. Press PRESET 2 to Play/Pause the song that is selected.
2. Track Forward/Back - Allows you to change tracks while streaming
audio. Press the < SEEK or SEEK > buttons to change tracks.
IMPORTANT NOTE
When using the ISBT21 in conjunction with an iPod cable on the
GateWay, if the iPhone is playing but you do not hear any sound,
check that the output source listed at the bottom of the iPhone
matches the source on the radio. This problem only occurs when
you have the iPhone hooked to the GateWay dock connector and
connected to the ISBT21 simultaneously.
7