Page 2
1. Introduction 2. Compatibility 3. Installation 4. Pair Your iPhone 5. Bluetooth Functions & Controls 6. Warranty Information Pages...
Page 3
ISBT21 & Optional Add-ons Factory Radio (not included) Vehicle Specific Harness (not included, actual harness may vary) GateWay™ Interface (not included) ISBT21 Port 1 Port 2 iPod Input HD Radio AUX Input Satellite Radio...
Page 4
The GateWay (uPAC) must be disconnected from the vehicle and allowed to sit for no less than five minutes before installing the ISBT21. The vehicle wiring harness may be left in place, but MUST BE DISCONNECTED from the GateWay (uPAC) interface before installing the Bluetooth Module.
Page 5
4. Pair Your Phone To use the iPhone with the ISBT21 you must first pair it with the Bluetooth module. Enter your iPhone’s Bluetooth menu by going to Settings>General>Bluetooth and search for a new device. It should discover the ISBT21 named “PHONEKIT”. If prompted for a PIN code enter 0000, otherwise just select “Pair”.
Page 6
IMPORTANT NOTE When using the ISBT21 in conjunction with an iPod cable on the GateWay (uPAC), if the iPhone is playing but you do not hear any sound, check that the output source listed at the bottom of the iPhone matches the source on the radio.
1 year as follows: Within the first 12 months from date of purchase, subject to the conditions above, ISimple Solutions will repair or replace the product at their discretion, if it is defective in material or workmanship providing it is returned to an Authorized iSimple Solutions Dealer, with PROOF OF PURCHASE from an authorized ISimple Solutions dealer.
Need help?
Do you have a question about the BluStream ISBT21 and is the answer not in the manual?
Questions and answers