Clearances; Figure 4 : Minimum Clearances To Combustible Materials - Drolet GRIZZLY Installation And Operation Manual

Refer to technical data of your fireplace on page 2, in order to know its technical and physical characteristics.
Respect required clearances to combustible materials while installing your fireplace. These clearances have
been verified and approved according to CAN/CSA B 140.3 and UL 896 standards.
Also respect required clearances of
the (A Type) chimney that you are
installing;
For this, see your local dealer to
know what are
specifications of
manufacturer that you are using;
Don't forget that the wooden parts of
the frame have to be 2 inches or
more from the factory built chimney;
The opening in the frame should be
36 3/4'' in width by 35 3/4'' in height.

Figure 4 : Minimum clearances to combustible materials

Clearances

Following are the clearances to combustible materials:
Ø
Ø
Ø
the clearance
the chimney
Page 4 of 23
2'' Back of fireplace;
4'' Sides of fireplace;
48'' Above fireplace.