Your stove has been designed to work with oil #1 or #2. DO NOT USE GASOLINE, CRANKCASE OIL
OR ANY OIL CONTAINING GASOLINE.
regarding damage cause by using other combustibles.
Make sure to use oil without impurities which may plug filters and valve's orifice. Impurities only give an
improper combustion.
BEFORE LIGHTING
make sure that :
Ø The tank is full;
Ø The isolating valve is open;
See that the ring is in the right position.(figure
23).
Make sure that the flow regulating handle is in
the « 0 » position (figure 24).
If it's not already done, arm down the valve's
lever located behind the stove (figure 25).
Wait for the valve to fill up and let the level
stabilize.
BEFORE
ATTEMPTING
STOVE,
MAKE
SURE
REGULATING HANDLE IS IN THE 0 POSITION.
Figure 24 : Constant level flow control
valve (carburetor)
ATTENTION:
DUE TO HIGH SURFACE TEMPERATURE, KEEP CHILDREN, CLOTHING AND
FURNITURE AWAY
OPERATION INSTRUCTIONS
Combustible
Lighting
TO
LIGHT
YOUR
THAT
THE
FLOW
Page 16 of 23
Drolet Stoves & Fireplaces declines all responsibility
Figure 23 : Burner, ring and catalyst
Figure 25 : Arming / dearming flow control
valve (carburetor)..