DFI G7S620-N User Manual page 86

3
BIOS Setup
PnP/PCI Configurations
This section shows how to configure the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
x IRQ Resources
x DMA Resources
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Disabled The BIOS will not reset the configuration data.
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto
Manual
86
Phoenix - AwardBIOS CMOS Setup Utility
Reset Configuration Data
Resources Controlled By
PCI/VGA Palette Snoop
: Move Enter: Select
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
The system will automatically detect the settings for you.
Choose the specific IRQ and DMA in the "IRQ Re-
sources" and "DMA Resources" field respectively.
PnP/PCI Configurations
Disabled
Auto(ESCD)
Press Enter
Press Enter
Disabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults