Super Io Device; Power On Function - DFI G7S620-N User Manual

3
BIOS Setup

Super IO Device

Move the cursor to this field and press <Enter>. The following
screen will appear.
↑↓→←
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.

Power On Function

This field allows you to use the PS/2 keyboard or PS/2 mouse to
power-on the system.
Button only
Password
Hot Key
Mouse Left
Mouse Right When this option is selected, double-click the right
Any Key
Keyboard 98 When this option is selected, press the "wake up"
78
Phoenix - AwardBIOS CMOS Setup Utility
Power On Function
KB Power On Password
Hot Key Power ON
Onboard FDC Controller
Onboard Parallel Port
Parallel Port Mode
EPP Mode Select
ECP Mode Use DMA
PWRON After PWR-Fail
Serial Port 1 Mode
Duplex Mode
Onboard Serial Port 1
Serial Port 1 Use IRQ
Onboard Serial Port 2
Serial Port 2 Use IRQ
Onboard Serial Port 3
Serial Port 3 Use IRQ
Onboard Serial Port 4
Serial Port 4 Use IRQ
: Move Enter: Select
F6: Fail-Safe Defaults
Default setting. Uses the power button to power
on the system.
When this option is selected, set the password you
would like to use to power-on the system in the
"KB Power On Password" field.
When this option is selected, select the function key
you would like to use to power-on the system in
the "Hot Key Power On" field.
When this option is selected, double-click the left
button of the mouse to power-on the system.
button of the mouse to power-on the system.
Press any key to power-on the system.
key of the Windows
power-on the system.
Super IO Device
BUTTON ONLY
Enter
Ctrl-F1
Enabled
378/IRQ7
SPP
EPP1.7
3
Off
Normal
HALF
3F8
IRQ4
2F8
IRQ3
3E8
IRQ10
2E8
IRQ11
+/-/PU/PD: Value F10: Save
®
98 compatible keyboard to
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults